PRAID EP420i FH/LP

The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together.
Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks.
Your operating system no longer accesses the individual hard disks, but the array.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure.
However, the theoretical security of the RAID concept is only as good as the RAID controller used.
Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.

PRAID EP400i / EP420i
The Fujitsu RAID ControllerPRAID EP400i with 8 ports sets new speed and data security standards for internal storage drives.
The RAID stack is based on the LSI MegaRAID® and offers high data throughput, a comprehensive fault tolerance function and user-friendly management options.
Moreover, the Controller management is integrated seamlessly into the Fujitsu server management concept.
All controller functions are supported by the Fujitsu ServerView RAID Manager.
The PRAID EP400i is designed for backward compatibility with 3Gbit/s SAS as well as with 6Gbit/s and 3Gbit/s SATA hard drives.
Regardless of the drive speed, it delivers significant performance improvements in both read and write applications.
Due to the support of 64-bit addressing, a robust set of RAID features and demanding error tolerance functions the controller provides high RAID performance and data availability.
Powerful online management service programs (Fujitsu ServerView RAID Manager), which are simple to operate and quick to install, provide the administrator with unparalleled flexibility and access to the arrays.
The RAID controller supports all of the important RAID levels including RAID 6 and 60.
The optional flash battery backup (FBU) combined with TFM module ensures the integrity of the data stored in the cache on the RAID controller in case of a power outage.
In this event, the data will be copied to a non-volatile flash memory (TFM).
The FBU provides a low-priced alternative to an uninterruptible power supply (UPS) and, when compared to battery backup up units (BBU), enables a long-term, secure store of data and better serviceability.
Always select FBU and TFM module in combination.
compatible:

AU254M5-RX2540M5

AU25M4

AU47M5-RX4770M5

CS ISP RX2540 M1

CS ISPRX2540M4

CS ISPRX2540M5

CS ISPRX2540M5M

CS-800-XXX-R2544

CS200C S4_RX2540 M4

CS800-S6-R2541

HNCM3-RX2530M5

MUM3-RX2530M5

PQ 2400E3

PQ 2800B3

PQ 2800E3

PQ 3400E

PQ 3800B

PQ 3800B2

PQ 3800E

PQ 3800E2

PRIMERGY CX2550 M2

PRIMERGY CX2550 M4

PRIMERGY CX2550 M5

PRIMERGY CX2560 M4

PRIMERGY CX2560 M5

PRIMERGY CX2570 M4

PRIMERGY RX1330 M2

PRIMERGY RX1330 M3

PRIMERGY RX1330 M4

PRIMERGY RX2510 M2

PRIMERGY RX2520 M4

PRIMERGY RX2520 M5

PRIMERGY RX2530 M1

PRIMERGY RX2530 M2

PRIMERGY RX2530 M4

PRIMERGY RX2530 M5

PRIMERGY RX2540 M1

PRIMERGY RX2540 M2

PRIMERGY RX2540 M4

PRIMERGY RX2540 M5

PRIMERGY RX2560 M1

PRIMERGY RX2560 M2

PRIMERGY RX300 S8

PRIMERGY RX4770 M1

PRIMERGY RX4770 M2

PRIMERGY RX4770 M3

PRIMERGY RX4770 M4

PRIMERGY RX4770 M5

PRIMERGY SX960 S1

PRIMERGY TX1320 M3

PRIMERGY TX1320 M4

PRIMERGY TX1330 M3

PRIMERGY TX1330 M4

PRIMERGY TX2550 M4

PRIMERGY TX2550 M5

PY RX2530 M1-L

PY RX2540 M1-L

SU300B-AU47M3

SU300B-MUHNCM2-AU25M1

SU310-RX4770 M5