SSD SATA, 6 Gb/s, 3.84 TB, Read-Intensive, hot-plug, 2.5-inch, enterprise, 1.2 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
SSD has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

SSD SATA, 6 Gb/s, 1.92 TB, Mixed-Use, hot-plug, 2.5-inch, enterprise, 5.0 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
SSD has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

SSD SATA, 6 Gb/s, 240 GB, Read-Intensive, hot-plug, 2.5-inch, enterprise, 1.5 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
SSD has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

SSD SATA, 6 Gb/s, 1.92 TB, Read-Intensive, hot-plug, 2.5-inch, enterprise, 1.5 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
SSD has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

M.2 Riser Kit
Verwendet in:

PRIMERGY RX2450 M2

PRIMERGY RX2530 M7

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

SSD M.2 SATA, 6 Gb/s, 240 GB, non hot plug, enterprise, 1.5 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
M.2 SATA is designed for use as a boot drive with the Endurance Spec. above. VMware is not supported._x000d_
2x M.2 SATA for any Hypervisor by the onboard chipset Software RAID is not supported. _x000d_
_x000d_
M.2 SATA has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level._x000d_
Fujitsu recommends the management software "ServerView RAID Manager" to monitor the write endurance for M.2 SATA.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

SSD M.2 SATA, 6 Gb/s, 480 GB, non hot plug, enterprise, 1.5 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
M.2 SATA is designed for use as a boot drive with the Endurance Spec. above. VMware is not supported._x000d_
2x M.2 SATA for any Hypervisor by the onboard chipset Software RAID is not supported. _x000d_
_x000d_
M.2 SATA has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level._x000d_
Fujitsu recommends the management software "ServerView RAID Manager" to monitor the write endurance for M.2 SATA.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

SSD M.2 SATA, 6 Gb/s, 240 GB, non hot plug, enterprise_x000d_
_x000d_
M.2 SATA is designed for use as a VMware ESXi boot drive._x000d_
2x M.2 SATA for any Hypervisor by the onboard chipset Software RAID is not supported.
Verwendet in:

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

NVIDIA MCX6-LX 2p 25GBASE-R LAN Controller_x000d_
OCPV3 Pull Tub_x000d_
RDMA (RoCE)
Verwendet in:

PRIMERGY CX2550 M7

PRIMERGY CX2560 M7

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY RX2530 M7

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

PRIMERGY RX4770 M7

1 channel 64Gbit/s FC controller with full height bracket and low profile bracketPCI interface: PCIe 4.0 x8,Optics: 64Gb short wave lasers with LC type connectors.These components ships with optical transceiver modules equipped for all ports. Supported line rates: 64,32 and 16Gbps.For users who use firmware version 9.12.01(MBI is 06.04.01),After firmware release later than 9.12.01, Firmware update is required when spare part exchange happens.Please refer to hint for the details.
Verwendet in:

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY RX2530 M6

PRIMERGY RX2530 M7

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

PRIMERGY RX4770 M6

PRIMERGY RX4770 M7

PRIMERGY RX8770 M7

PRIMERGY TX2550 M7

NVIDIA MCX6-Lx 25GBASE-R LAN Controller_x000d_
Full height / Low profile_x000d_
PCIe 4.0 x 8_x000d_
RDMA (RoCE)
Verwendet in:

PRIMERGY CX2550 M7

PRIMERGY CX2560 M7

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY RX2530 M7

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

PRIMERGY RX4770 M7

PRIMERGY RX8770 M7

PRIMERGY TX1320 M6

PRIMERGY TX1330 M6

PRIMERGY TX2550 M7

Set of relevant Cables for system upgrades with RAID Cards. The Cable Set is RAID Card- and System specific. It also includes Signal and LED Cables.
Verwendet in:

CS INT PROC RX2530-M6 (EWAB)

CS INT PROC RX2540-M6 (EWAA)

CS ISPRX2530M7

CS ISPRX2540M7

HNCM4-RX2530M6

MUM4-RX2530M6

PRIMERGY CX2550 M5

PRIMERGY CX2550 M6

PRIMERGY CX2550 M7

PRIMERGY CX2560 M5

PRIMERGY CX2560 M6

PRIMERGY CX2560 M7

PRIMERGY GX2560 M7

PRIMERGY GX2570 M6

PRIMERGY RX1330 M4

PRIMERGY RX1330 M5

PRIMERGY RX1330 M6

PRIMERGY RX1440 M2

PRIMERGY RX2450 M1

PRIMERGY RX2450 M2

PRIMERGY RX2520 M5

PRIMERGY RX2530 M5

PRIMERGY RX2530 M6

PRIMERGY RX2530 M7

PRIMERGY RX2540 M5

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

PRIMERGY RX4770 M5

PRIMERGY RX4770 M6

PRIMERGY RX4770 M7

PRIMERGY RX8770 M7

PRIMERGY TX1310 M5

PRIMERGY TX1320 M4

PRIMERGY TX1320 M5

PRIMERGY TX1320 M6

PRIMERGY TX1330 M4

PRIMERGY TX1330 M5

PRIMERGY TX1330 M6

PRIMERGY TX2550 M5

PRIMERGY TX2550 M7

SU330-RX4770M6

Set of relevant Cables for system upgrades with RAID Cards. The Cable Set is RAID Card- and System specific. .
Verwendet in:

CS ISPRX2540M7

PRIMERGY RX2450 M2

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

SSD SAS 12G 1.92TB Read-Int. 2.5" H-P

SDD/HDD: 1920 GB SSD 2,5''

Chassis: 2,5''

SSD SAS, 12 Gb/s, 1,92 TB,

leseintensiv, Hot-Plug, 2,5-Zoll,

Unternehmen, 1 DWPD (Drive Writes Per

Day für 5 Jahre)

PY-SS19NNQ

Verwendet in:

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

SSD SAS, 12 Gb/s, 960 GB, Read-Intensive, hot-plug, 2.5-inch, enterprise, 1 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
SSD has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
Verwendet in:

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

Chargez votre monde Chargez la plupart des appareils USB-C® avec un seul chargeur compact. Le chargeur pour ordinateur portable HP 65W USB-C fournit jusqu’à 65 W d’alimentation, ce qui est suffisant pour pratiquement tous les appareils USB-C®.

SSD SAS, 24 Gb/s (link rate is 22.5 Gb/s), 15.36 TB, Read-Intensive, hot-plug, 2.5-inch, enterprise, 1 DWPD (Drive Writes Per Day for 5 years)_x000d_
_x000d_
SSD has a built-in Wear-Out indicator. In this case the warranty for such a component, as an exception to the system warranty, is restricted to the time period until the indicator reaches the exhaust level.
Verwendet in:

PRIMERGY CX2560 M7

PRIMERGY RX1440 M2

PRIMERGY RX2450 M2

PRIMERGY RX2530 M6

PRIMERGY RX2530 M7

PRIMERGY RX2540 M6

PRIMERGY RX2540 M7

PRIMERGY RX4770 M7

PRIMERGY TX2550 M7

HP 7,4-mm-zu-4,5-DC-Dongle. Die

Garantiefürist für HP Business

Notebook Adapter beträgt ein Jahr

für Teileaustausch.

K0Q39AA

HP DisplayPort-auf-VGA-Adapter

AS615AA

HP USB-3.0-zu-Gigabit-LAN-Adapter

4Z7Z7AA

HP wiederaufladbarer Active Pen G3.

HP Wiederaufladbarer Active Pen G3,

USB-A zu USB-C Ladekabel,

Dokumentation. Ladbarer

Lithium-Ionen-Akku.

6SG43AA

Display: 14''

HP Renew Business 14,1 Zoll

Laptop-Tasche. Die LDPE-Tasche

besteht zu 100 % aus recyceltem

Kunststoff, Das Aufhängeretikett

besteht zu 100 % aus recyceltem

Papier, 100 % Kunststoff, der

andernfalls ins Meer gelangen würde.

Fach 1: Haupt-Reißverschlussfach mit

Notebook-Tasche mit doppelt

gewickelten verschließbaren

Reißverschlüssen Außentaschen 2:

Schlupftasche mit Reißverschluss

vorne, Versteckte RFID-Tasche mit

Reißverschluss hinten Innentaschen

4: geheime/versteckte Tracker-Tasche

und Powerbank-Tasche, nahe

Kabeldurchführung

3E5F9AA

Display: 15,6''

HP Prelude Pro 15,6 Zoll Recycled

Topload-Tasche. 65 % recycelter

Haushaltskunststoff, Die LDPE-Tasche

besteht zu 100 % aus recyceltem

Kunststoff, Das Aufhängeretikett

besteht zu 100 % aus recyceltem

Papier

1X645AA

Display: 15,6''

HP Prelude Topload (15,6 Zoll).

Materialien: 300D, Cross-dyed,

gewebt, 180 g Netzgewebe, Futter aus

Polyestergewebe: 100 % Polyester

(210D)

1E7D7AA